Skip to content
Archery Insider

All articles

Page 3 of 10 · 273 articles, newest first

Diagram of measuring Easton's Correct Arrow Length at full draw with a mark about one inch past the arrow rest contact, and an arrow saw wheel cutting a third of the way through a rotating shaft, with safety rules for dust masks and approved sawsTraining

How to Cut Carbon Arrows Safely at Home

How to cut carbon arrows safely: measuring the right length, what Easton and Gold Tip say about tools, carbon dust safety, squaring the ends and spine changes.

October 25, 2026 · 8 min read

Six-panel diagram of tying a D-loop: melt one end, tie the first knot above the nock position, tie the second knot below facing the other way, trim and melt the end, cinch tight with pliers with a nock in place, and clip the release to the finished loopTraining

How to Tie a D-Loop on a Bowstring

How to tie a D-loop step by step: the right cord and length, melting ends safely, cinching the knots, whether it changes draw length, and peep alignment.

October 21, 2026 · 9 min read

Diagram of three ways sight pins glow in low light: fibre-optic pins, a battery sight light and self-luminous pinsGear

Are Lighted Bow Sights Legal for Hunting?

Are lighted bow sights legal? How fibre-optic, battery-lit and self-luminous pins differ, how state rules treat them, with Wyoming and Kansas examples.

October 17, 2026 · 9 min read

Diagram of ATA draw length: the distance from the nocking point to the grip's pivot point plus one and three-quarter inchesGuides

Draw Weight vs Draw Length Explained

Draw weight vs draw length explained: what each means, how they are measured (ATA standard), how they interact on recurves and compounds, and how to set both.

October 15, 2026 · 10 min read