G5 Deadmeat V2 Review: Flight, Cut and Verdict
G5 Deadmeat V2 review: the all-steel three-blade rear-deploying mechanical with a 1-1/2 inch cut, its crossbow version, elk use, and Megameat and Rage rivals.
By Archery Insider Editorial Team
· 9 min read
Research-based: built from maker specs and official sources, fact-checked before publishing. How we review products

In this article
The G5 Deadmeat V2 is a three-blade mechanical broadhead machined from steel, with blades that ride folded in flight and swing open from the rear on impact to a 1-1/2 inch cut. For anyone reading G5 Deadmeat V2 reviews, that middle-of-the-road cut is the thing to weigh: wider than any of G5's fixed big-game heads, narrower than the 2 inch Megameat. Our verdict: it's a sensible mechanical for hunters who want a tough, moderate-cut expandable, especially on a crossbow, provided you replace collars as G5 advises. You can compare G5 Deadmeat V2 listings on Amazon, checking the grain weight and the crossbow or standard version. G5 bars resellers from Amazon without its written consent, so check the seller too.
G5 Deadmeat V2
Advantages
- Machined steel body, which G5 rates as far tougher than aluminium heads
- SnapLock collar designed with high-speed crossbows in mind
- Standard and crossbow versions in 100 and 125 grain
- BMP practice head included; blades and collars are replaceable
Trade-offs
- Collars are a consumable: G5 recommends replacing them after use
- Smaller cut than the Megameat or Rage's 2 inch Hypodermic heads
- Mechanicals face restrictions or extra rules in some places
G5 Deadmeat V2
G5 Deadmeat V2 specs
These figures come from G5's Deadmeat page and its online store. G5 doesn't publish blade thickness, ferrule length or a launch date for the V2.
| Spec | G5 Deadmeat V2 | Source |
|---|---|---|
| Type | Expandable, three rear-deploying blades | G5 page |
| Construction | "Machined from 100% steel"; store lists "100% Grade 'A' Steel" | G5 page and store |
| Cutting diameter | 1-1/2 in | G5 page |
| Weights | 100 and 125 grain | G5 page |
| Versions | Standard and crossbow, both weights | G5 store |
| Retention | SnapLock collar | G5 page |
| Practice head | BMP practice tip included | G5 store |
| Spare parts | Replacement blade kit, replacement collars, crossbow collars | G5 store |
You may see it described as stainless steel elsewhere. G5's own pages just say "100% steel", so we've used G5's wording.
Design and features
Steel body. G5 machines the Deadmeat V2 "from 100% steel" and claims it's "about 320% tougher than our competitors' Aluminum broadheads." G5 doesn't explain how it measured that, so treat it as a maker claim rather than a test result.
Rear-deploying blades. G5 says its "rearward sliding steel blades are designed for better cutting on impact," and that rear deployment and "the proper blade angle" mean better penetration. Unlike over-the-top designs, whose blades swing forward and out, the Deadmeat's blades slide back as they open. G5 publishes no deployment force or penetration figures for the V2.
SnapLock collar. The collar is the part that keeps the blades closed. G5 says it was "Made with high-speed crossbows in mind" and "locks blades in place during flight, yet quickly releases the blades upon impact." G5 also sells separate replacement collars and says they "are recommended to be replaced after use to maximize blade retention."
Replaceable parts. G5's Deadmeat V2 Replacement Blade Kit contains nine blades and three SnapLock collars "of every kind", enough for three heads, plus a steel wrench for separating the stem from the ferrule.
BMP practice head. Each pack includes a Ballistic Match Point. G5 says it's made "with identical dimensions" and a rounded edge to limit target wear. G5 also sells Deadmeat BMPs separately, three per pack, in 100 and 125 grain.

Fit, setup and the crossbow version
Choose 100 or 125 grain to match the point weight you've tuned with, and pick the version that matches your launcher: G5's store lists standard and crossbow variants of each weight, plus "Megameat / Deadmeat V2 Crossbow Collars" that G5 says work on both heads.
For a crossbow, use the crossbow version and the weight your crossbow maker specifies. Our crossbow broadheads guide explains why crossbow-rated retention matters at those launch speeds.
A short set-up routine before the season:
- Spin each head on its arrow to check it's straight.
- Check every collar is seated and every blade is locked closed.
- Shoot your field points and the BMPs at the same aim point.
- Shoot at least one real Deadmeat V2 into a broadhead target, then replace that collar.
If your broadheads and field points don't group together, our field points vs broadheads guide walks through the fixes.
How it compares: Megameat, Rage Hypodermic and Grim Reaper Razortip
| Head | Blades | Cut (100 gr) | Retention | Body |
|---|---|---|---|---|
| G5 Deadmeat V2 | 3 | 1-1/2 in | SnapLock collar | Steel |
| G5 Megameat | 3 | 2 in | SnapLock collar | Not stated; chisel tip |
| Rage Hypodermic Trypan NC | 2 (crossbow listing) | 2 in | NC tabs, no collar | Titanium ferrule |
| Grim Reaper Razortip | 3 | 1-3/8 in (Extra: 1-3/4 in) | Not stated | Aluminium ferrule |

G5 Deadmeat V2 vs Megameat. These are siblings with the same SnapLock system and the same crossbow collars. The Megameat opens to "a massive 2" cutting diameter" and has a chisel tip that G5 says helps it "bust through bone." The Deadmeat V2 is the narrower choice, with half an inch less cut.
G5 Deadmeat V2 vs Rage Hypodermic. Rage's Hypodermic Trypan NC opens to 2 inches with "swept back" .039 inch stainless blades on a one-piece titanium ferrule, and replaces the collar with tabs on the blades' pivot point, which Rage calls its NC (No Collar) system. The Trypan NC page doesn't state a blade count, but Rage lists the crossbow version as a "2 Blade Broadhead". Our Rage broadheads review covers the whole Hypodermic family.
G5 Deadmeat V2 vs Grim Reaper Razortip. The Razortip comes in several cuts, from 1-1/8 inch at 75 grain to 2 inches in the Whitetail Special, with .035 inch 440 stainless blades on an "aircraft-grade aluminum" ferrule. The Razortip offers more cuts and weights; the Deadmeat V2 offers steel.
Is the G5 Deadmeat V2 good for elk?
G5 doesn't market the Deadmeat V2 as an elk head or publish penetration data, so there's no maker answer. Elk states also set their own rules, from minimum broadhead widths to minimum draw weights, and some treat expandables differently. Our elk bowhunting setup guide covers draw weight, arrow weight and the main states' broadhead rules.
What other people found
We found no controlled test of the V2, but two hunters have published accounts.
- Petersen's Hunting (Colton Heward, August 2025) describes a 43-yard shot on a mule deer with a Deadmeat V2 that passed through and "pierced both lungs and clipped the top of his heart." He's a long-time fan, but adds: "Is it the ideal broadhead for every situation? Probably not." That's one hunter's field experience, not a measured test.
- N1 Outdoors (John Lusk, December 2020) shot a G5 Deadmeat from a 73 lb bow into 3/8 inch plywood. He found penetration "very good", the blades deployed, though one opened less than the others, and the blades were dulled with one slightly bent afterwards. The article doesn't say whether the head was the V2.
Who should buy it, and who shouldn't
- Buy it if you shoot a crossbow and want a three-blade mechanical with crossbow-specific collars.
- Buy it if you want a moderate-cut expandable with a steel ferrule.
- Skip it if you don't want to replace collars, or you hunt where mechanicals are restricted.
Legal notes
Washington makes it unlawful to hunt big game "with fixed broadhead blades or open expandable blades with less than seven-eighths of an inch cutting diameter." Oregon requires broadheads for game mammals to be "non-barbed and at least 7/8" wide," and adds that "Broadheads with moveable blades that fold/collapse when withdrawn are not considered barbed." The Deadmeat V2's 1-1/2 inch cut clears a 7/8 inch minimum, but check how your state treats expandables before you hunt.
Rules checked on 15 October 2026; this isn't legal advice and regulations change, so confirm with your state wildlife agency.
Where to buy
G5 sells the Deadmeat V2 through its own store and dealers. Its online sales policy says resellers may not sell G5 products on Amazon or other marketplaces "without the advanced express written authority and consent" of G5, and its warranty covers "the original owner with proof of purchase." Check the seller before you order. You can search for the crossbow version on Amazon and pick up spare blades and collars at the same time.
Frequently asked questions
Is the G5 Deadmeat V2 a good crossbow broadhead?
G5 designed its SnapLock collar "with high-speed crossbows in mind" and sells crossbow versions of the Deadmeat V2 in 100 and 125 grain, plus crossbow collars. Use the crossbow version, match the weight your crossbow maker specifies, and check that each collar holds the blades firmly before you hunt.
G5 Deadmeat V2 vs Megameat: which should I choose?
Both are three-blade rear-deploying expandables with SnapLock collars. The Megameat opens to 2 inches and adds a chisel tip; the Deadmeat V2 opens to 1-1/2 inches. Choose the Megameat if you want the biggest cut, or the Deadmeat V2 if you prefer a moderate cut.
Do you have to replace the collars after every shot?
G5 says its replacement collars "are recommended to be replaced after use to maximize blade retention." So treat a fired collar as spent, even if the head looks fine. Spare collars are sold on their own and in G5's blade kit.
What's the difference between the Deadmeat and the Deadmeat V2?
G5 calls the V2 "an improvement on the original Deadmeat 3-blade expandable broadhead," with a steel body, replaceable rear-deploying blades and the SnapLock collar. G5 doesn't publish a side-by-side list of changes or the V2's launch date, so we can't say exactly which parts differ.
Related articles
ReviewsG5 Montec Review: Flight, Cut and Verdict
G5 Montec review: the one-piece steel fixed blade in 85, 100 and 125 grain, CS and Pink versions, resharpening, FOC, and Montec vs Stinger and Exodus.
November 9, 2026 · 9 min read
GearPractice Broadheads: Are They Worth Using?
Practice broadheads explained: what they match, when they help with mechanical heads, which makers still sell them and why the real broadhead decides.
Updated October 8, 2026 · 5 min read
TrainingDo Crossbows Need Broadhead Tuning?
How to broadhead tune a crossbow: why broadheads can hit apart from field points, the spin test, nock indexing, and when to re-zero for hunting heads.
Updated October 6, 2026 · 5 min read
