Skip to content
Archery Insider

Xecutioner Broadheads Review

Xecutioner broadheads review: the Texas maker's 2.5 inch Xpandable, 75 grain, 125 grain Hybrid and Kinesis fixed heads, materials, crossbow use and legality.

By

· 9 min read

Research-based: built from maker specs and official sources, fact-checked before publishing. How we review products

Simplified three-panel diagram: a two-blade expandable folded with a band and then open to 2.5 inches, a hybrid with a 3/4 inch fixed cut-on-contact tip blade plus 2.5 inch expanding blades for a listed 3 1/4 inch total, and a fixed head with a 1.375 inch main blade and 0.875 inch bleeder, with Xecutioner's listed materials
Where the cut comes from on an expandable, a hybrid and a fixed head, using Xecutioner's listed figures. These are simplified shapes, not drawings of Xecutioner's heads.Diagram: Archery Insider

Xecutioner broadheads come from Xecutioner Broadheads LLC, a small maker in Weatherford, Texas. Its main product is a two-blade, cut-on-contact mechanical with a 2.5 inch cut, sold at 100 grains in several colours, alongside a 75 grain 1.5 inch version, a 125 grain Hybrid with a fixed tip blade, and a fixed-blade head called the Kinesis.

There isn't much written about this brand, and we found no independent test of any Xecutioner head. So this review sticks to what the maker and Lancaster Archery, a large dealer that stocks the brand, actually list: the models, the materials, how the designs work, where they suit low-poundage bows and crossbows, and what to check before you hunt with one.

The Xecutioner line-up

Here's everything we found listed in October 2026, with each spec's source.

ModelTypeCutWeightPackStatus when checked
Xpandable (Expandable Mechanical)2-blade mechanical, cut-on-contact2.5 in, or 1 3/4 in setting (maker)100 gr4 heads (Lancaster adds 4 replacement bands)Maker: 8 colours; Lancaster: green in stock, other colours special order
Xpandable 75 gr "Big Red"2-blade mechanical, cut-on-contact1.5 in75 gr6 headsMaker and Lancaster, in stock at Lancaster
HybridFixed tip blade plus 2 expandables3/4 in fixed + 2.5 in expandable (3 1/4 in listed)125 gr4 heads (Lancaster)Maker lists it; Lancaster unavailable
Kinesis (Xecutioner/DH)Fixed blade, tanto tip1.375 in main blade, 0.875 in bleeder100 gr (2 blades) or 125 gr (4 blades)3 headsMaker only
Demon Hunter Chop-O, Rake, Cartel3-blade expandables1.5, 2 and 1.75 in100, 100 and 125 gr3 headsLancaster listings, unavailable
Turkey NeckerTurkey headNot statedNot statedNot statedMaker only, no specs

The 100 grain Xpandable is the head the brand is built around: the maker sells it in red, purple, green, orange, pink, yellow, blue and black, and says the colours make heads "easier to spot" after a shot. The 75 grain version is red only.

Two smaller items are worth knowing about. The maker sells 100 grain replacement blades separately, and Lancaster has listed a "Slocker Small Game Collar by Tim Wells", a reusable collar of about 15 grains that it says can back "any broadhead for more knockdown power on medium game"; it was unavailable when we checked.

How the Xpandable works

The Xpandable is a two-blade mechanical with a cut-on-contact tip. In flight the blades fold against the ferrule, held by a band (Lancaster's 100 grain listing includes "4 replacement bands"); on impact the tip starts cutting and the blades swing open to full width.

The unusual claim is adjustment. The maker calls it the "Worlds only adjustable cut mechanical broadhead" and the "Worlds only Adjustable Weight Broadhead", listing "2.5 inch and 1 3/4 inch cutting diameter". Lancaster's listing says it has an "Adjustable ferrule for bow speed & poundage". Neither site explains how the adjustment is made or which weights it gives, so ask the maker before you rely on it.

Why would you want a smaller cut? A mechanical spends some energy opening its blades, and a wider cut means more tissue to push through. That's why many low-energy set-ups use narrower mechanicals or fixed blades. Our fixed-blade vs mechanical broadheads comparison explains that trade-off, and our arrow kinetic energy and momentum guide shows how to estimate what your set-up carries.

The 75 grain version goes further: a 1.5 inch cut with .050 inch blades in a light head that Lancaster says suits "lighter poundage bows or someone looking to get the most speed possible". Remember that dropping point weight changes your arrow's dynamic spine and balance, so re-check flight after any change.

The Hybrid: fixed tip plus expandables

A hybrid broadhead adds a small fixed blade at the tip to a set of expanding blades. The fixed blade cuts from the moment of contact, and it still cuts if the expanding blades don't open fully.

Xecutioner's Hybrid lists "125 Grain 3 1/4 inch cut", matching Lancaster's "2.5" xpandable plus 3/4" fixed cutting diameter". Lancaster mentions an "Energy-preserving 'kinetic' tip" and the same adjustable ferrule as the Xpandable.

Blade thickness is unclear. The maker lists ".50 Thick Blades" and Lancaster ".0050"", and neither figure looks right for a broadhead blade. Ask the maker before you buy if thickness matters to you.

Remember that "3 1/4 inch" is the two figures added together. The widest single cut is the 2.5 inch expanding pair.

The Kinesis fixed blade

The Kinesis, introduced on the maker's page as the "XECUTIONER/DH - KINESIS", is the brand's fixed-blade option. The maker lists "440C Steel Blades", a "Fixed True Tanto Tip", a "1.375 Main Blade" and a "0.875 inch Bleeder", with "2 Blades 100 Grain" and "4 Blades 125 Grain", three per pack. It also lists "Low KE Tested" and "Short Draw Tested", but publishes no test details, so treat those as claims.

For a hunter with a light draw weight or short draw length, a fixed head like this is the more conventional choice than any wide mechanical, because there are no blades to open. Like any fixed blade, though, it needs a well-tuned bow to group with field points.

Materials

Xecutioner's home page says: "Our 7570 Aluminum Ferrule, 440 Stainless Steel Blades, and 390M Steel are designed to give you the best hunting experience possible." Its about page repeats "7570 aluminum ferrules and 440 stainless steel blades".

A couple of notes on those words. We couldn't find a standard aluminium alloy called 7570; 7075 is the common high-strength grade, so "7570" may be a typo, but only the maker can confirm. The site doesn't say which part uses "390M Steel". And the Kinesis is listed with 440C, a hardenable stainless grade, while the mechanicals say "440 stainless" without a suffix.

Low poundage and crossbows

Crossbows. Every Xpandable listing on the maker's site says "Cross Bow Compatable" and "Vertical Bow Capability". That's a maker claim, so check your crossbow maker's rules on broadhead type and weight before you shoot one; many crossbow makers specify a point weight. Our crossbow broadheads guide explains what to look for.

Low poundage. The maker hasn't published a minimum draw weight or energy figure for any head. If your bow is at the light end, the safer starting points in this range are the Kinesis fixed head or the 75 grain 1.5 inch Xpandable, not the 2.5 inch cut.

Your set-upStarting point in the rangeWhy
Fast compound or crossbow, mechanicals legal100 gr Xpandable at 2.5 inWidest cut; the maker lists crossbow compatibility
Lighter draw weight, mechanicals legal75 gr Xpandable (1.5 in)Smaller cut; Lancaster pitches it at lighter bows
Want a cut if blades fail to open125 gr HybridFixed 3/4 in tip blade
Low energy, or expandables restrictedKinesis fixedNothing to deploy

Legality: mechanicals, width and barbs

The Xpandable, Hybrid and Demon Hunter heads are expandables, so first confirm mechanicals are allowed for your species and season. Then check width: Washington's WAC 220-414-070 makes it unlawful to hunt big game with "open expandable blades with less than seven-eighths of an inch cutting diameter". Every Xecutioner cut listed, including the 1.5 inch 75 grain head and the 1 3/4 inch setting, clears that.

For barbs, Oregon's ODFW page says broadheads "must be non-barbed and at least 7/8" wide" and that "Broadheads with moveable blades that fold/collapse when withdrawn are not considered barbed."

Rules checked on 9 October 2026; this isn't legal advice and regulations change, so confirm with your state wildlife agency before you hunt.

Check the flight claims yourself

The maker lists "Field Point Accuracy" for its mechanicals and says the Kinesis "Flies Like a Dart". Folded mechanicals often do group close to field points, but nobody has published a test of these heads, so check yours.

Two target faces: broadheads grouping away from field points before tuning, and both grouping together after tuning
Before tuning, broadheads often group away from field points. Check any new head this way at your longest hunting distance.Diagram: Archery Insider

Shoot matching-weight field points and a broadhead-tipped arrow at the same spot from 20, 30 and 40 yards, using a separate aiming spot for each. Spin-test every arrow first. If they separate, tune the bow rather than moving the sight; our field points vs broadheads guide walks through the fixes. With expandables, replace the band or blades after any shot that opens them.

Xecutioner broadheads

Advantages

  • Very wide 2.5 inch cut on the 100 grain Xpandable
  • Lighter 75 grain, 1.5 inch option and a 125 grain Hybrid
  • A fixed-blade Kinesis for lower-energy set-ups
  • Maker lists crossbow and vertical bow compatibility
  • Colour choice helps you find heads after a shot

Trade-offs

  • No independent tests found; all performance claims are the maker's
  • Adjustable cut and weight aren't explained on the maker's site
  • Some listed specs look like typos (blade thickness, ferrule alloy)
  • Patchy availability at dealers in October 2026
  • Wide mechanical cuts need plenty of arrow energy

Where to buy

The maker sells direct from xecutionerbroadheads.com and says it ships worldwide, with US orders going by USPS Ground Advantage. Lancaster Archery carried the 100 grain green and 75 grain red Xpandables when we checked, with other colours as special orders. We couldn't confirm Xecutioner heads on Amazon, so we haven't linked to any listing there. If you buy direct, note the maker's return policy: it asks dissatisfied customers to get in touch "within 14 days of purchase", so open and inspect your heads as soon as they arrive.

Frequently asked questions

Are Xecutioner broadheads any good?

We can't say from testing, and we found no independent tests to quote. On paper, the 100 grain Xpandable offers a very wide 2.5 inch cut with a cut-on-contact tip, and the range covers mechanical, hybrid and fixed designs. The maker's claims, such as field-point accuracy, are unverified, so test a pack on your own bow first.

Who makes Xecutioner broadheads?

Xecutioner Broadheads LLC, based in Weatherford, Texas, according to the footer of its website. The site describes its heads as using "7570 aluminum ferrules and 440 stainless steel blades". Lancaster Archery lists the brand as vendor "Xecutioner Broadheads", and the maker's page names its fixed head the "XECUTIONER/DH - KINESIS".

Can you use Xecutioner broadheads on a crossbow?

The maker lists every Xpandable as "Cross Bow Compatable", but it doesn't publish speed ratings. Check your crossbow maker's broadhead rules, including point weight and whether mechanicals are allowed, and confirm your state permits expandables for the species you're hunting. Then check that broadhead-tipped bolts group with your field points.

What does "adjustable cut" mean on the Xpandable?

The maker lists a 2.5 inch and a 1 3/4 inch cutting diameter and calls the head the "Worlds only adjustable cut mechanical broadhead". Lancaster mentions an "Adjustable ferrule for bow speed & poundage". Neither explains how to switch settings, so contact the maker for instructions before you set up your heads.

Tags:xecutioner broadheadsxecutioner broadheads reviewexpandable broadheadhybrid broadheadmechanical broadheadreview