G5 Broadheads Review: Montec, Striker and Deadmeat
G5 broadheads explained: one-piece Montec, Striker V2 and X, Deadmeat V2, Megameat and T2 expandables, turkey and small game heads, crossbow versions and rules.
By Archery Insider Editorial Team
· 11 min read
Research-based: built from maker specs and official sources, fact-checked before publishing. How we review products

In this article
G5 broadheads come from G5 Outdoors of Memphis, Michigan, and the range is wider than its best-known head suggests. There's the one-piece Montec family, the replaceable-blade Striker V2 and four-blade Striker X, three expandables (Deadmeat V2, Megameat and T2), a Small Game Head, and a turkey decapitation head called the Dirty Bird.
One correction to a common assumption: the Deadmeat isn't a fixed blade. G5 calls the Deadmeat V2 a "3-blade expandable broadhead" with rear-deploying blades. This review sorts every current G5 head by type and use, explains how each design works, and covers crossbow versions, turkey and small game, and the broadhead rules that decide what you can hunt with.
The G5 broadhead line-up
These are the broadheads in G5's store in October 2026, with G5's figures. "Crossbow" means G5 sells a crossbow version.
| Model | Type | Blades | Cutting diameter | Weights | Crossbow version |
|---|---|---|---|---|---|
| Montec | Fixed, one piece | 3 | 1 to 1-1/8 in | 85, 100, 125 gr | Yes (100, 125 gr) |
| Montec M3 | Fixed, one piece | 3 | 1-1/16 in | 100, 125 gr | Yes |
| Montec CS | Fixed, one piece (carbon steel) | 3 | 1-1/16 in | 100 gr | Not listed |
| Pink Montec | Fixed, one piece | 3 | 1 to 1-1/16 in | 85, 100 gr | Not listed |
| Striker V2 | Fixed, replaceable blades | 3 | 1.25 in | 100, 125 gr | Yes (also Deep Six) |
| Striker X | Fixed, replaceable blades | 4 | 1.25 in | 100, 125 gr | Yes |
| Deadmeat V2 | Expandable, rear-deploying | 3 | 1-1/2 in | 100, 125 gr | Yes |
| Megameat | Expandable, rear-deploying | 3 | 2 in | 100, 125 gr | Yes |
| T2 | Expandable, rear-sliding | 2 | 2 in | 100, 125 gr | Yes |
| Small Game Head | Blunt with curved blades | Not stated | 1 in | 100, 125 gr | Not listed |
| Dirty Bird | Turkey decapitation | 3 | 3 in | 125 gr | Not listed |
G5 also sells practice versions: the Montec Pre-Season and a range of BMP (Ballistic Match Point) heads for the Montec, Striker V2, Striker X, Deadmeat and T2. Some store variants were out of stock when we checked, so the weight you want may not always be available.
Montec: one piece of steel
The Montec is G5's signature head, and its design is simple. Tip and three blades are made as a single piece. G5's store describes "One-Piece MIM Construction" (MIM is metal injection moulding), "Cut-On-Contact Design" and "100% Spin Tested" heads, and says: "With no components to assemble or replace, simply screw on and shoot."
Because the edges run right to the point, a Montec starts cutting the moment it touches hide. With nothing to come loose, a Montec can't lose a blade on bone, and G5 says it's "easy to sharpen for multiple uses". The trade-off is that a dull Montec has to be sharpened, not re-bladed, and its cut is modest next to G5's expandables.
There are four hunting versions:
- Montec: 85, 100 and 125 grain, with crossbow models at 100 and 125 grain. G5's store gives "1" to 1 1/8" Cutting Diameter" across the weights.
- Montec M3: "Machined from one solid piece of 420 high-grade stainless steel with no vents", which G5 says gives "quiet flight and added strength and durability". 100 and 125 grain, 1-1/16 inch.
- Montec CS: carbon steel, 100 grain only, with what G5 calls an additional honing process on top of its "Diamond Cut Sharpness". G5 says it's "easily re-sharpened after repeated use".
- Pink Montec: the standard design with a pink epoxy finish, in 85 and 100 grain.
The Original Montec page says "Designed + Machined in Michigan, U.S.A." That wording appears on the Montec page; we didn't find the same line on every product page.
Striker V2 and Striker X: replaceable blades
The Strikers are still fixed heads, but the blades are separate parts locked into a machined steel ferrule with what G5 calls the "Anix Blade Locking System". When an edge is damaged, you replace the blade instead of sharpening the whole head, and G5 sells replacement blade kits for both.
G5 describes the Striker V2 as its "sharpest, most devastating 3 blade fixed broadhead", with a 1.25 inch cut, "Ultra Sharp Lutz Blades" and 100 or 125 grain weights. Lancaster's listing gives the blade thickness as .032 inch. G5's store also lists a Deep Six version at 100 grain, for arrows with Deep Six inserts.
The Striker X uses "the same ultra sharp blades as the previous Striker V2 but now with 4 blades". G5 says that gives "33% more cutting surface", while the cutting diameter stays at 1.25 inches. Lancaster notes the crossbow version's "Ferrule built optimized for crossbow bolts".
Choosing between the two is mostly about blade count. Four blades cut more tissue along the wound; three blades present less surface to the wind. G5 doesn't publish a penetration or flight comparison, so don't assume one beats the other on your bow.
Deadmeat V2, Megameat and T2: G5's expandables
All three of G5's expandables keep their blades closed in flight and open them on impact, but they do it in different ways.

Deadmeat V2. G5 machines it "from 100% steel" and says its "rearward sliding steel blades are designed for better cutting on impact." The blades are held by a SnapLock collar, which G5 says "locks blades in place during flight, yet quickly releases the blades upon impact", and was "Made with high-speed crossbows in mind". It has a 1.5 inch cut and comes with a BMP practice head. G5 sells a kit with replacement blades and collars.
Megameat. Same SnapLock system and rear-deploying design, but three blades open to a 2 inch cut. G5 adds that "A chisel tip enhances the G5 Megameat Mechanical Broadhead's ability to bust through bone." It's a big hole by design, and one buyer quoted on G5's own page warns that "they will destroy lots of meat".
T2. Developed "In collaboration with John Dudley, of Nock On Archery", the T2 is a two-blade expandable with a 2 inch cut. Instead of a collar, it uses G5's "Socket-Lock™ Retention System", which G5 describes as a "ball and socket retention system" with "ZERO rattle and ZERO pre-deployment". G5 also calls it "barbless". The standard and crossbow T2s are separate products: Lancaster lists the standard head as "Vertical/compound bow only" and the crossbow edition as "Designed for use with Crossbows only".
Expandables usually fly more like field points, and they cut wider than any fixed G5 head. They also have more parts to check, and they're the type of head some states restrict. Our fixed-blade vs mechanical broadheads comparison explains the wider trade-offs.
Turkey and small game: the Dirty Bird and Small Game Head
If you searched for turkey broadheads from G5, the answer is the Dirty Bird. G5 calls it a "decapitation turkey broadhead", developed "In collaboration with Chris Bee, of Bee Real Custom". It has three replaceable blades with a 3 inch cut and weighs 125 grain. Its blades fold closed for the quiver and open for the hunt, with "Magnetic Retention" holding them in place, and its blunt tip and ferrule are "Designed and shaped to stop the broadhead from penetrating". Lancaster lists it as a "Mechanical/fixed hybrid" sold in a two-pack with a practice field point.
A decapitation head is built for head and neck shots, which is a small target on a moving bird. Our guide to turkey shot placement with a bow covers where to aim for head and body shots.
The Small Game Head is a different tool. G5 says its "blunt tip provides the 'shock' and the curved blades provide the 'ripping' action that also prevents the arrow from burrowing under the ground." It's 100% stainless, comes in 100 and 125 grain, and cuts 1 inch. G5 pitches it for "small game species with any type of bow at any speed". It isn't a big-game head.

Our guide to small game bowhunting points compares blunt heads, Judo points and small-game broadheads.
Practice heads: Pre-Season Montec and BMPs
G5 sells practice versions of most of its heads, which saves wearing out sharp blades in a target.
- Montec Pre-Season: G5 says it's "dimensionally identical to the Montec", with rounded edges and a black coating so you can tell it apart. It comes in 85, 100 and 125 grain.
- BMPs: G5 says each one is "a ballistic match" to its hunting head, "Safe to use on any target". There are BMPs for the Montec, Striker V2, Striker X, Deadmeat and T2.
A practice head is a good way to check flight all year, but it's still worth a final check with the hunting heads themselves. Our field points vs broadheads guide explains why impact points move and how to tune them back together.
Legality: mechanicals, cutting width and barbs
Broadhead rules usually test cutting width, whether the head is mechanical, and whether it's barbed. Here's how G5's range lines up.
| Rule type | What to look for | Where G5 heads stand |
|---|---|---|
| Minimum cutting width | 7/8 inch is common for big game | All of G5's big-game heads list 1 inch or more |
| Expandable heads | Some places restrict them, or measure them open | Deadmeat V2, Megameat and T2 are expandable; Lancaster calls the Dirty Bird a hybrid |
| Barbs | Some states require non-barbed heads | G5 calls the T2 "barbless"; G5 doesn't classify the others |
| Turkey and small game | Rules can differ from big game | Dirty Bird and Small Game Head are specialist heads, not big-game heads |
Washington shows how expandables can be measured. Its rule makes it unlawful to hunt big game "with fixed broadhead blades or open expandable blades with less than seven-eighths of an inch cutting diameter."
Oregon sets the same width plus a barb rule for game mammals: "Broadheads must be non-barbed and at least 7/8" wide. Broadheads with moveable blades that fold/collapse when withdrawn are not considered barbed." For wild turkey, ODFW allows "Any recurve, long, or compound bow using any type of arrow or point."
Rules checked on 9 October 2026; this isn't legal advice and regulations change, so confirm with your state wildlife agency before you hunt.
G5 broadheads on a crossbow
G5 sells crossbow versions of the Montec, Montec M3, Striker V2, Striker X, Deadmeat V2, Megameat and T2. For the expandables, that matters: crossbow speed and acceleration can push a weak retention system open in flight, and G5's SnapLock collar was designed "with high-speed crossbows in mind". G5 describes the Montec as "Crossbow-Friendly" too.
Use the crossbow version where one exists, match the weight your crossbow maker specifies (usually 100 grain), and confirm that your bolts' total weight meets the maker's minimum. Our crossbow broadheads guide explains weight, retention and tuning in more detail.
Which G5 head suits you
- Montec (85, 100 or 125 gr): hunters who want a simple, durable head with no parts to replace and are happy to sharpen it. The 85 grain version suits lighter set-ups built around that point weight.
- Montec M3 or CS: Montec fans who want the 420 stainless and unvented M3 for quiet flight, or the carbon steel CS for an edge that's easy to resharpen.
- Striker V2: anyone who'd rather swap blades than sharpen them, with a wider 1.25 inch cut than the Montec.
- Striker X: the same, with four blades.
- Deadmeat V2: hunters who want an expandable with a moderate 1-1/2 inch cut and a collar that's easy to reset.
- Megameat or T2: big-cut expandable fans; the T2 if you want two blades and G5's ball-and-socket retention, the Megameat if you want three.
- Dirty Bird: turkey hunters set on head and neck shots.
- Small Game Head: rabbits, squirrels and similar small game.
G5 broadheads
Advantages
- Wide range: one-piece fixed, replaceable-blade fixed, expandable and specialist heads
- Montec family has no parts to come loose and can be resharpened
- Crossbow versions of most hunting heads
- Practice heads for most models, including Pre-Season Montec and BMPs
- Montec is designed and machined in Michigan, according to G5
Trade-offs
- Montec cut (about 1 to 1-1/8 in) is the smallest of G5's big-game heads
- Expandables face restrictions in some places
- Some weights and versions were out of stock in G5's store when we checked
- Blade thickness isn't listed for most models on G5's pages
- No dedicated turkey body-shot head; the Dirty Bird is for head and neck shots
You can browse G5 Montec 100 grain listings on Amazon, look for the Striker V2 or search for the Deadmeat V2. Check the weight, whether it's the crossbow version, and the pack size in each listing.
Frequently asked questions
Does G5 make a turkey broadhead?
Yes. The G5 Dirty Bird is a turkey decapitation head with three replaceable blades, a 3 inch cut and a 125 grain weight. Its blades fold closed for the quiver and lock open with magnets. It's designed for head and neck shots, so check your state's turkey rules and practise on a realistic target before the season.
Is the G5 Deadmeat a fixed blade or a mechanical?
It's a mechanical. G5 describes the Deadmeat V2 as a three-blade expandable with rear-deploying blades, held closed by a SnapLock collar until impact, and a 1-1/2 inch cutting diameter. Replacement blades and collars are sold as a kit, and each pack includes a BMP practice head for checking flight.
What's the difference between the Montec and the Striker V2?
The Montec is one solid piece with three blades and a cut of about 1 to 1-1/8 inches, so you sharpen it when it dulls. The Striker V2 has three replaceable Lutz blades locked into a machined steel ferrule and a 1.25 inch cut, so you swap blades instead. Both come in 100 and 125 grain.
Are G5 broadheads made in the USA?
G5 Outdoors is based in Memphis, Michigan, and its Original Montec page says "Designed + Machined in Michigan, U.S.A." We didn't find the same statement on every G5 product page, so if country of origin matters to you, check the packaging or ask G5 about the specific head.
Related articles
ComparisonsFixed-Blade vs Mechanical Broadheads: Pros, Cons and Rules
Fixed-blade vs mechanical broadheads compared: flight, tuning, cutting diameter, energy needs, durability, hybrid designs, regulations and which suits your bow.
Updated October 9, 2026 · 6 min read
TrainingField Points vs Broadheads: Why Impact Changes
Why broadheads hit differently from field points, and how to fix it: paper tuning, spin-testing, micro-tuning the rest at 30 yards, FOC and re-sighting.
October 14, 2026 · 9 min read
GearCrossbow Broadheads: What's Different, How to Choose
Crossbow broadheads explained: why crossbow versions exist, fixed vs mechanical at crossbow speeds, broadhead and bolt weight, legal rules and safe handling.
October 9, 2026 · 9 min read
