Made-in-USA Archery Gear: Bows, Arrows, Broadheads

What carbon arrows are made in the USA? On the maker pages we could read, Easton is the clearest: it says its arrows are "made at our factories in Utah and Indiana." For broadheads, QAD, G5 and VPA all make plain US manufacturing statements, and among compound bow makers PSE, Bowtech and Bear say their bows are American made. Several big names say less than you'd expect, and we couldn't confirm a single crossbow maker's claim.

This guide quotes each maker's own wording, explains what "Made in USA" is supposed to mean under the Federal Trade Commission's standard, and shows you how to check a product before you buy.

What "Made in USA" actually means

In the United States, origin claims are policed by the Federal Trade Commission. Its business guide, "Complying with the Made in USA Standard", sets out the rule we used to read every quote below.

• "All or virtually all." The FTC says this means "the final assembly or processing of the product occurs in the United States, all significant processing that goes into the product occurs in the United States, and all or virtually all ingredients or components of the product are made and sourced in the United States."
• Negligible foreign content. The FTC adds that the product should contain no foreign content, or only a negligible amount.
• Qualified claims are allowed. The FTC's own examples include "60% U.S. content" and "Made in USA of U.S. and imported parts."
• "Assembled in USA" is a different claim. A product with foreign parts can say it "when its principal assembly takes place in the U.S. and the assembly is substantial."
• Labels carry penalties. Under the Made in USA Labeling Rule, "Marketers are now subject to civil penalties if they use an unqualified Made in USA label on a product that is not 'all or virtually all' made in the U.S., including in catalogs or online."

Rules checked on 9 October 2026; this isn't legal advice and the standard can change, so confirm with the FTC.

The practical point: "American made" on a home page is a brand message. The label and listing for each product are what to read before you buy.

Carbon arrows made in the USA

Carbon arrows are the category with the most search interest and, oddly, the fewest clear statements.

Easton. In a June 2019 post titled "Easton Arrows Made In USA", Easton's vice president of manufacturing is quoted saying: "We're proud to offer hunters all over the world a top-shelf product that is made at our factories in Utah and Indiana." The same post says Easton "employs over 300 workers in its arrow manufacturing facilities in Utah and Indiana." That's a clear statement about where Easton builds arrows. It doesn't say where the raw carbon fibre comes from, and it doesn't say every model in the catalogue is built in those plants, so check the packaging of the exact shaft you want.

Gold Tip. Gold Tip's about page says "Every Gold Tip arrow is manufactured from the finest aerospace-grade materials" but doesn't say where. We found no origin claim on the pages we read.

Where the carbon itself comes from is the question forum threads argue about, and none of the maker pages we read answer it. Under the FTC standard, a major component made abroad would matter for an unqualified claim, which is one more reason to read the label rather than the slogan. If you're still deciding between materials, our carbon vs aluminium arrows comparison covers the trade-offs, and our arrow buying guide explains spine and weight.

Broadheads made in the USA

Broadheads are where US manufacturing claims are most specific, probably because many heads are machined in small, specialised shops.

QAD (Quality Archery Designs). QAD's own product pages, as archived in 2023 and 2024, open with: "Exodus broadheads are 100% designed and manufactured in the good ol' USA." An archived 2020 version of QAD's about page adds: "We take pride in manufacturing our own products in Madison Heights, Virginia." QAD's site blocked automated reading in October 2026, so these quotes come from Wayback Machine copies; Lancaster Archery's current listing repeats the Exodus sentence word for word. Our separate QAD Exodus review covers the heads themselves.

G5 Outdoors. G5's about page says it is "located in Memphis, Michigan" and that "G5 designs, manufactures, and assembles all our products right here in Memphis." That covers its whole range, as G5 words it.

VPA. VPA's about page says: "All VPA broadheads are designed and manufactured in our facility in Fort Wayne, Indiana using advanced CNC machining technology and hardened tool steels." It adds: "Every broadhead we make is still proudly manufactured in the USA."

All three make fixed-blade heads. If you're still weighing that against an expandable, our fixed-blade vs mechanical broadhead comparison explains the differences and the legal points.

Compound bows made in the USA

Compound bows involve dozens of parts (risers, limbs, cams, strings, bearings, grips), so a full "all or virtually all" claim is a big promise. Here's what each maker says about itself.

PSE. PSE's home page says "AMERICAN MADE, PRECISION-ENGINEERED." A badge in its footer reads "Proudly Made in Tucson, Arizona USA."

Bowtech. Bowtech's about page says: "Bowtech bows are made in America, by passionate employees who take pride in every step of the build process." The claim doesn't name a city, although the page lists an address in Eugene, Oregon.

Bear Archery. Bear's about page carries the heading "MADE IN THE USA" and says: "We are Bear Archery - proudly crafting our bows in Gainesville, FL, USA." Bear also sells youth and starter models, so check the listing for the specific bow.

Hoyt. Hoyt's about page describes "our current 150,000-square-foot, state-of-the-art facility in Salt Lake City, Utah." That tells you where Hoyt's main facility is, but the page doesn't use the words "made in USA", so we haven't counted it as a claim.

Mathews. Mathews' "Who We Are" page says its intention "is, and has always been, to maintain every aspect of the build in-house." That's a statement about control, not about country, and the page doesn't say where the bows are built.

Elite. We couldn't load Elite's about pages, so we have nothing to quote.

Mathews, Hoyt and Elite sell through authorised pro shops rather than Amazon. If origin matters to you, ask the dealer to show you the box label for the exact model; a good shop will also set the bow up for your draw length, which no online order can do.

Recurve and traditional bows

Searches for a "recurve bow made in USA" usually mean a custom traditional bow or a classic hunting recurve.

• Bear Archery. Bear's "crafting our bows in Gainesville, FL, USA" statement covers its bows generally, and the same page credits Fred Bear with "the first fiberglass take-down bow". Check the exact model's listing.
• Black Widow. Black Widow's site shows an address in Nixa, Missouri and describes bows "Precision Crafted" to order, but the pages we read don't make a "made in USA" statement. Ask the maker if you need it in writing.

Crossbows: what we couldn't confirm

This is the honest gap. We looked for a maker statement on the main US crossbow brands and found none we could quote.

• Ravin. Ravin's about page says it was "Founded in Superior, Wisconsin." Where a company was founded isn't a statement about where its crossbows are built.
• TenPoint. TenPoint's site blocked automated reading during our check, and the archived pages we found were years old, so we haven't quoted them.

Crossbows contain scopes, triggers, strings and cocking devices from many suppliers, so ask the maker and read the box. One related point: QAD's archived Exodus crossbow head page carries the same "100% designed and manufactured" sentence as its other heads, so a crossbow can at least shoot a US-made broadhead. Our crossbow broadheads guide explains what crossbow heads need.

Sights and releases

T.R.U. Ball and Axcel. This release and sight maker has a page titled "Made in the U.S.A." It says its products "are Made 100% in the USA, from the engineering design concept to machining, assembling, and shipping straight to your door from our facility in Virginia." That's one of the most complete statements we found anywhere in archery.

The verified list at a glance

How to check a product yourself

1. Find the exact model's label or listing. Brand pages talk about the company. The box, the spec sheet or the maker's product page is what describes the item you'll own.
2. Read the exact words. "Made in USA", "Made in USA of U.S. and imported parts" and "Assembled in USA" are three different promises, as the FTC's examples show.
3. Watch for the soft signals. A US address, a flag finish, "American owned" or "designed in" isn't an origin claim.
4. Check the date. Companies change suppliers and factories. Our QAD quotes come from archived pages, for example, so confirm they still hold when you buy.
5. Ask. Email the maker or ask your pro shop, "Is this model made in the USA, and is that on the label?" A clear answer is worth more than any badge.

If you want to compare options, you can browse Easton arrows on Amazon, or look at QAD Exodus, G5 and VPA broadheads. Check the origin line in each listing; we haven't tested these products.

Frequently asked questions

What carbon arrows are made in the USA?

Easton is the clearest case we found. Its own post says its arrows are "made at our factories in Utah and Indiana." It doesn't say where the raw carbon fibre comes from or that every model is built there, so read the packaging. Gold Tip's about page makes no origin claim, and we couldn't confirm other brands' wording.

Are any broadheads made in the USA?

Yes. QAD says its Exodus heads are "100% designed and manufactured in the good ol' USA" (archived pages), G5 says it "designs, manufactures, and assembles" everything in Memphis, Michigan, and VPA says its heads are made in Fort Wayne, Indiana. Other brands may also qualify; we only list makers whose wording we could read.

What compound bows are made in the USA?

PSE ("AMERICAN MADE"), Bowtech ("made in America") and Bear ("MADE IN THE USA", crafted in Gainesville, Florida) say so on their own sites. Hoyt describes a Salt Lake City facility and Mathews an in-house build, but neither page we read uses the words. Ask your dealer to show you the box label.

What crossbows are made in the USA?

We couldn't confirm any. Ravin's page says it was founded in Superior, Wisconsin, which isn't a manufacturing claim, and TenPoint's site blocked our reading. Crossbows use many bought-in parts, so a qualified claim would be common. Ask the maker directly and check the label on the box before you buy.