Wicked Ridge RDX 410 Review: Speed, Cocking and Verdict
Wicked Ridge RDX 410 review: what 410 fps really means, the ACUdraw Silent crank, conflicting listed specs, and how it compares with the Fury 410 and Titan 400.
By Archery Insider Editorial Team
· 12 min read
Research-based: built from maker specs and official sources, fact-checked before publishing. How we review products

In this article
Lancaster Archery's listing calls it "the working man's reverse draw crossbow", and that's a fair summary of the Wicked Ridge RDX 410: a 29-inch reverse-draw crossbow from TenPoint's Wicked Ridge brand, rated up to 410 fps, with a built-in crank that cocks it for about 5 lb of effort. This Wicked Ridge RDX 410 review explains what you actually get, including one catch the headline number hides: the 410 fps figure is for a lighter arrow than the three that come in the box. If it's already on your shortlist, you can compare Wicked Ridge RDX 410 packages on Amazon.
Wicked Ridge RDX 410
Advantages
- Short 29 in reverse-draw layout with a 15.5 in power stroke
- ACUdraw Silent crank built into the stock: about 5 lb of cocking effort
- Arrives pre-sighted at 20 yards, according to Wicked Ridge
- Lighted Pro-View 400 scope with aim points to 70 yards
Trade-offs
- No de-cocking with the crank: plan on a discharge target
- Retailer specs disagree with the maker on width, draw weight and weight
- Headline 410 fps uses a lighter arrow than the ones in the box
Wicked Ridge RDX 410 (Peak XT)
Wicked Ridge RDX 410 specs
These figures come from Wicked Ridge's product page (a June 2026 Internet Archive capture), cross-checked against Lancaster Archery's listing, the Kinsey's distributor listing (vendor item WR24060-4556) and Bowhunter's launch article on 15 October 2026. Where a source disagrees with the maker, we use the maker's figure and show the other.
| Spec | Figure | Source |
|---|---|---|
| Speed, 370-grain Pro Lite arrow | 410 fps | Maker, Kinsey's |
| Speed, 410-grain Match 400 arrow | 400 fps | Maker, Kinsey's |
| Power stroke | 15.5 in | Maker, Lancaster, Kinsey's |
| Length (without stirrup) | 29 in | All |
| Width, cocked | 9 in (maker, Kinsey's, Bowhunter); 9.5 in (Lancaster spec list) | Maker: 9 in |
| Width, uncocked | 15 in | Maker, Lancaster, Kinsey's |
| Draw weight | 200 lb (maker, Kinsey's); 180 lb (Bowhunter) | Maker: 200 lb |
| Weight | 7.5 lb (maker, Lancaster, Kinsey's); 7.25 lb (Bowhunter) | Maker: 7.5 lb |
| Limbs and cams | 11.7 in limbs, Reaper Cam System | Bowhunter, Lancaster |
| Trigger | T5, 3.5 lb pull | Lancaster (name), Bowhunter (pull) |
| Cocking | ACUdraw Silent, about 5 lb of effort | All |
| In the package | Pro-View 400 scope, 3 Match 400 carbon arrows, quiver | Maker, Lancaster, Kinsey's |
The width conflict even appears inside one listing: Lancaster's description gives a 9-inch width, while its spec list says 9.5 inches cocked. Bowhunter's 7.25 lb and Kinsey's 7.5 lb are both "without accessories". Go with the maker: a 9-inch, 200 lb, roughly 7.5 lb crossbow before the scope and quiver go on.
Design and features: what each part does for you
Reverse draw, and why it matters in a stand
A reverse-draw crossbow mounts its limbs so the cams sit back toward the shooter rather than out at the front. Lancaster's listing says the design "generates more speed with less draw weight" and gives "superior balance". In plain terms, more of the weight sits near your hands, so the crossbow feels less nose-heavy when you hold it up on a deer. The layout also allows a long power stroke in a short package: 15.5 inches here, against 12 inches for TenPoint's forward-draw Titan 400.

Bowhunter reports that the RDX 410 is "a full three inches shorter than its predecessor, the RDX 400", and that its Tactical X stock has cutouts that make it lighter than the RDX 400's stock. If the mechanics are new to you, our guide to how a crossbow works explains how power stroke, draw weight and cams combine into speed.
ACUdraw Silent: cocking without a rope
The ACUdraw Silent is a crank cocking device built into the butt stock. Lancaster's listing says it reduces cocking effort "to just 5 lbs." and notes that because it's integrated, "you never need to worry about forgetting your cocking rope". Bowhunter adds that a locking mechanism holds the handle in place if your hand slips.
What it can't do is de-cock. TenPoint's ACUdraw Silent manual is blunt: "Do NOT attempt to de-cock the crossbow with the ACUdraw Silent." It also warns there's no slip clutch, so stop cranking as soon as the safety clicks from Fire to Safe. TenPoint sells a separate ACUdraw De-Cock system, fitted to the Fury 410 De-Cock and Phantom De-Cock, for letting the string down without shooting. With the RDX 410, plan on firing a bolt or a discharge arrow into a safe target at the end of each hunt. Our guide on how to cock a crossbow covers crank, rope and hand cocking step by step.
Speed, arrows and kinetic energy
Here's the catch with the name. Wicked Ridge rates the RDX 410 at 410 fps with a 370-grain Pro Lite carbon arrow and 400 fps with the 410-grain Wicked Ridge Match 400 arrow. The package comes with three Match 400 arrows, so out of the box you're shooting 400 fps, not 410. The maker lists 138 ft-lb of kinetic energy with the light arrow and 146 ft-lb with the Match 400, which our own check with the standard formula matches. They're calculated, not measured.
The heavier arrow gives up 10 fps but, on these ratings, carries about 8 ft-lb more energy. Lancaster's Match 400 listing describes 20-inch carbon shafts checked to within .004 inches for straightness, with 3-inch vanes and TenPoint's Alpha-Nock, which it says holds the string in place on narrow crossbows. Lancaster gives the arrow's weight as 400 grains, slightly lighter than the 410 grains in the maker's speed rating; neither explains the gap.
T5 trigger and string stop
Lancaster names the trigger as the T5, and Bowhunter gives it a 3.5-pound pull. Deer & Deer Hunting calls it "ultra-crisp". An integrated string stop system, according to Lancaster, reduces noise and vibration.
Pro-View 400 scope
The package scope is the Pro-View 400, a 4x32 with red or green illumination. Deer & Deer Hunting says it accommodates crossbows shooting between 380 and 420 fps and offers aim points to 70 yards. Wicked Ridge says the package arrives pre-sighted at 20 yards, which is a starting point, not a substitute for checking your own zero. Our crossbow scope sight-in guide walks through confirming each aim point.
Fit, setup and what else you need
The RDX 410 comes as a package, so the main jobs are confirming your zero and sorting out spares:
- Read the manual first, especially the ACUdraw Silent section and the list of approved arrows.
- Mount and check the quiver so it doesn't touch the limbs or cams when the crossbow is cocked.
- Confirm the 20-yard zero with field points, then check the 30, 40 and 50-yard aim points before you add broadheads.
- Buy spare arrows that match: more Match 400s, or another arrow Wicked Ridge approves for this crossbow.
- Pick a discharge method. Lancaster lists a TenPoint universal discharge arrow with an Alpha-Nock for crossbows that shoot 20-inch arrows; its head is designed to absorb the energy when you unload after the hunt.
For the arrows, you can browse Wicked Ridge Match 400 arrows on Amazon. Think about weight too: at around 7.5 lb, the RDX 410 is short but not light. Smaller or younger shooters should try one in a shop before buying. Crossbow rules for hunting vary by state and season, so check our overview of whether crossbows are legal for hunting and your wildlife agency's current regulations before opening day.
How it compares: Fury 410, Ravin R10 and Titan 400

| Crossbow | Rated speed | Cocked width | Length | Weight | Cocking |
|---|---|---|---|---|---|
| Wicked Ridge RDX 410 | 410 fps (370 gr) | 9 in | 29 in | 7.5 lb | ACUdraw Silent |
| Wicked Ridge Fury 410 De-Cock | 410 fps | 9 in | 29 in | 7.5 lb | ACUdraw De-Cock |
| TenPoint Titan 400 | 400 fps | 9.75 in | 33 in | 6 lb | ACUdraw Silent |
| TenPoint Phantom De-Cock | 400 fps | 8 in | 28.5 in | 7.4 lb | ACUdraw De-Cock |
| Ravin R10 Pro | 420 fps (400 gr) | 6.5 in | 32.5 in | 7.40 lb | Versa-Draw |
Wicked Ridge Fury 410 vs RDX 410
On paper they're near twins. Lancaster lists the Fury 410 De-Cock as a reverse-draw crossbow at 410 fps, 29 inches long, 9 inches cocked, 7.5 lb and 200 lb of draw weight, with the same 11.7-inch limbs and Reaper Cam System. The differences are in the stock and the box: the Fury uses the ACUdraw De-Cock with an Auto-Brake Gear System that stops the handle if you let go, a two-stage D-1 trigger with a Dry-Fire-Prohibitor, and a RangeMaster Pro scope instead of the Pro-View 400. If both are available to you, the de-cocking crank is the main reason to choose the Fury.
Wicked Ridge RDX 410 vs Ravin R10
Ravin's original R10 page wasn't available to us; Ravin now sells the R10 Pro, which it describes as taking "the proven performance of the R10" to higher levels. Ravin lists the R10 Pro at 420 fps with a 400-grain arrow, 156 ft-lb, 6.5 inches cocked, 32.5 inches long and 7.40 lb, with a Versa-Draw crank that needs 12 lb of force and can cock and un-cock the crossbow. It's far narrower and can de-cock, but it's longer and sits in a much higher price bracket.
Wicked Ridge RDX 410 vs Titan 400
TenPoint's Titan 400 is a forward-draw crossbow that Lancaster lists at 400 fps, 9.75 inches cocked, 33 inches long, 6 lb and a 12-inch power stroke, with the same ACUdraw Silent and Pro-View 400 scope. It's the lighter carry by about 1.5 lb; the RDX 410 is 4 inches shorter and has the reverse-draw balance.
TenPoint Phantom De-Cock
If width and de-cocking both matter, TenPoint's Phantom De-Cock is the obvious step up: a reverse-draw crossbow that Lancaster lists at 400 fps, 8 inches cocked, 28.5 inches long and 7.4 lb, with the ACUdraw De-Cock and a metal barrel. For a forward-draw TenPoint with a de-cocking crank, see our TenPoint Turbo X review.
Who should buy the RDX 410, and who shouldn't
Buy it if you are:
- A tree-stand hunter who wants a short, well-balanced crossbow and is happy shooting a bolt into a target to unload.
- Someone who finds rope cocking hard work: the ACUdraw Silent needs about 5 lb of effort.
- A buyer who wants a complete, pre-sighted package with a lighted scope and arrows.
Look elsewhere if you are:
- Keen on safe de-cocking: the Fury 410 De-Cock or Phantom De-Cock offer it.
- Hunting from small ground blinds where 9 inches is too wide: the Phantom (8 inches) or R10 Pro (6.5 inches) are narrower.
- Counting every ounce on a long walk in: the forward-draw Titan 400 is listed at 6 lb.
Where to buy the Wicked Ridge RDX 410
The RDX 410 is sold by archery and outdoor retailers, including Lancaster Archery. If you buy online, check that the listing says RDX 410 (not the older RDX 400) and that it includes the ACUdraw Silent, Pro-View 400 scope, arrows and quiver. Kinsey's lists the UPC as 788244017229 for the Peak XT camo package, which is a useful cross-check.
Frequently asked questions
Is the Wicked Ridge RDX 410 worth it?
For a stand hunter who wants a short reverse-draw crossbow with an integrated crank, it has a strong case on paper: 29 inches long, a 15.5-inch power stroke and about 5 lb of cocking effort. Its crank can't de-cock, though, and the Fury 410 De-Cock offers that on near-identical specs.
How fast is the Wicked Ridge RDX 410 really?
Wicked Ridge rates it at 410 fps with a 370-grain Pro Lite arrow and 400 fps with the 410-grain Match 400 arrows included in the package. Those are manufacturer ratings repeated by retailers, not chronograph results, and we found no independent speed test to quote.
What is the difference between the Wicked Ridge Fury 410 and RDX 410?
Both are 29-inch, 410 fps reverse-draw crossbows with 11.7-inch limbs and the Reaper Cam System. The Fury 410 De-Cock uses the ACUdraw De-Cock, which can let the string down safely, plus a two-stage D-1 trigger and a RangeMaster Pro scope. The RDX 410 uses the ACUdraw Silent, a T5 trigger and the Pro-View 400.
Can you de-cock the RDX 410 without shooting it?
No. TenPoint's ACUdraw Silent manual says not to attempt to de-cock the crossbow with it; that ability belongs to the separate ACUdraw De-Cock fitted to models such as the Fury 410 De-Cock. Plan to unload by shooting a field-point bolt or a discharge arrow into a safe target, following your owner's manual.
How much does the Wicked Ridge RDX 410 weigh?
Wicked Ridge, Lancaster and Kinsey's list 7.5 lb; Deer & Deer Hunting says that's without the ACUdraw Silent. Bowhunter gives 7.25 lb without accessories. Expect something around 7.5 lb for the bare crossbow, and more once the scope, quiver and arrows are fitted.
Related articles
ReviewsTenPoint Turbo X Review: Speed, Cocking and Verdict
TenPoint Turbo X review: 415 fps, ACUslide cocking and safe de-cocking, Outdoor Life's accuracy results, the Vision package and the Venom X compared.
October 11, 2026 · 12 min read
ReviewsCenterPoint Sniper Elite 385 Review: A Budget Crossbow Explained
CenterPoint Sniper Elite 385 review: 385 fps, 185 lb draw, 14-inch power stroke, 4x32 scope package, safety features, set-up, and who it suits.
Updated April 9, 2026 · 7 min read
ReviewsRavin R29X Review: Speed, Cocking and Verdict
Ravin R29X review: a 450 fps bullpup crossbow with silent crank cocking. Specs, R29 and R10X comparisons, the RDS package and who should buy it.
October 15, 2026 · 12 min read
