Skip to content
Archery Insider

Draw Length Calculator (Wingspan and Height)

Free draw length calculator: enter your wingspan or height in inches or centimetres for a starting estimate, with a worked example and a printable chart.

By

· 5 min read

Diagram of a person standing in a T position with a tape measured from middle fingertip to middle fingertip, the formula wingspan divided by 2.5, and a worked example of 70 inches giving a 28-inch draw length
The wingspan method: measure middle fingertip to middle fingertip, then divide by 2.5 for a starting draw length.Diagram: Archery Insider

This draw length calculator turns your wingspan into a starting draw length using the method the Archery Trade Association (ATA) teaches beginners: wingspan divided by 2.5. If you only know your height, it gives a rougher range instead. Either way, the answer is a starting point to confirm on a bow, not a final fitting.

Calculator

Draw length calculator

Stand with arms out level, palms forward, and measure middle fingertip to middle fingertip.

Method: Wingspan ÷ 2.5, the ATA wingspan method published on Archery 360

An estimate to start from, not a fitting. A pro shop can confirm it on your bow.

How the calculator works

The wingspan method comes from Archery 360, the ATA's site for new archers. Its May 2026 article says to "stand relaxed and raise your arms so you're standing in a 'T' position," have a friend measure "from the tip of one middle finger, across your back, to the tip of your other middle finger," and "then divide this number by 2.5." It calls the result "a great starting point," and adds that "it's important to fine-tune."

The calculator does exactly that and nothing more:

InputWhat it calculatesWhat you see
Wingspan (in)Wingspan ÷ 2.5One estimate, in inches and centimetres
Wingspan (cm)Converted to inches (÷ 2.54), then ÷ 2.5One estimate, in inches and centimetres
Height (in or cm)Height ÷ 2.5, used as a stand-in for wingspanA range 1 inch either side, flagged as rougher

Why does height work at all? Archery Calculators, a third-party reference site, says its height chart is "most accurate for adults with typical arm proportions (wingspan approximately equal to height)." Plenty of people aren't typical, which is why the calculator widens the answer to a 2-inch range and asks you to measure your wingspan. Nothing is sent anywhere; the sums run in your browser.

You may also see a second rule of thumb, (wingspan − 15) ÷ 2. We couldn't trace it to a primary source, so the calculator doesn't use it. Our guide on how to measure your draw length compares the two and explains the full-draw measurement.

Worked example

Say your friend measures your wingspan at 69 inches.

  1. Divide by 2.5: 69 ÷ 2.5 = 27.6 inches.
  2. Convert if you need metric: 27.6 × 2.54 = 70.1 cm.
  3. Round sensibly: take about 27.5 inches to your bow fitting and adjust from there.

If you measured in centimetres, the sum is the same: a 175 cm wingspan ÷ 2.5 = 70 cm, or about 27.6 inches.

Now the height version. You're 5 ft 10 in, which is 70 inches. 70 ÷ 2.5 = 28.0 inches, so the calculator shows 27.0 to 29.0 inches. That range is wide on purpose: two people of the same height can have arms of quite different length.

Printable wingspan to draw length chart

Every figure below is wingspan ÷ 2.5, rounded to one decimal place. Print it or save it for the range.

WingspanWingspan (cm)Estimated draw lengthDraw length (cm)
54 in137 cm21.6 in54.9 cm
56 in142 cm22.4 in56.9 cm
58 in147 cm23.2 in58.9 cm
60 in152 cm24.0 in61.0 cm
62 in157 cm24.8 in63.0 cm
64 in163 cm25.6 in65.0 cm
66 in168 cm26.4 in67.1 cm
68 in173 cm27.2 in69.1 cm
70 in178 cm28.0 in71.1 cm
72 in183 cm28.8 in73.2 cm
74 in188 cm29.6 in75.2 cm
76 in193 cm30.4 in77.2 cm
78 in198 cm31.2 in79.2 cm
80 in203 cm32.0 in81.3 cm
Bar chart of estimated draw length from wingspan divided by 2.5, from a 60-inch wingspan giving 24.0 inches to a 78-inch wingspan giving 31.2 inches
The same formula as a chart, from a 60-inch wingspan (24.0 inches) to 78 inches (31.2 inches). Each extra 2.5 inches of wingspan adds one inch of draw length.Diagram: Archery Insider

Fine-tuning the estimate

Archery 360 says to "shoot a bow set to that measured draw length" and then adjust:

  • Bow-arm elbow bent at full draw: "you may need a slightly longer draw length."
  • Elbow hyperextended: "the draw length probably needs to be shortened."
  • At the right length: the string "should rest on the corner of your mouth and the tip of the nose."

It also warns that "a draw length that's even an inch too long or short can cause problems ranging from decreased accuracy to injury." On a compound, the cams fix the draw length, and changing it may need new modules or a bow press. Our guide to draw weight vs draw length explains how the two settings interact.

Your arrows follow your draw length, too. Archery 360 points out that if your draw length isn't settled first, "you'll end up needing new arrows if you make a change." Once you've confirmed it, see how long your arrows should be.

Frequently asked questions

Which bow draw length calculator is best?

The most widely taught method is the simplest: wingspan ÷ 2.5, which the Archery Trade Association publishes on Archery 360 as a starting point. Any calculator built on it, including this one, should give the same answer. What matters more is measuring your wingspan accurately and then checking the result at full draw.

Can I use my height instead of my wingspan?

Yes, as a rough guide. Height stands in for wingspan, which works best for people whose arm span roughly matches their height. That's why this calculator shows a 2-inch range for height instead of a single number. Measure your wingspan with a helper for a better estimate.

How accurate is the wingspan ÷ 2.5 method?

It's an estimate based on typical proportions, and Archery 360 calls it "a great starting point" that still needs fine-tuning. Your anchor point, form and bow type all shift the real number. Confirm it by shooting a bow set to that length, or by having a pro shop measure you at full draw.

Does the draw length calculator work in centimetres?

No. The ratio is the same in any unit: divide your wingspan in centimetres by 2.5 to get draw length in centimetres. Bows are usually specified in inches, so divide that answer by 2.54. A 175 cm wingspan gives 70 cm, or about 27.6 inches.

Tags:draw length calculatordraw lengthwingspanbow fittingcompound bowrecurve
Diagram of ATA draw length: the distance from the nocking point to the grip's pivot point plus one and three-quarter inchesGuides

Draw Weight vs Draw Length Explained

Draw weight vs draw length explained: what each means, how they are measured (ATA standard), how they interact on recurves and compounds, and how to set both.

October 15, 2026 · 10 min read