Skip to content
Archery Insider

Morrell Yellow Jacket YJ-350 vs Block Classic 18: Which Backyard Target?

Morrell Yellow Jacket YJ-350 vs Block Classic 18: published specs, fused versus open-layer foam, sides, speed rating, arrow removal, and which target suits you.

By

· 4 min read

Research-based: built from maker specs and official sources, fact-checked before publishing. How we review products

A layered foam block target in a wooden frame on an outdoor archery range
A layered foam target on an outdoor range. Both targets reviewed here use layered or fused foam to stop arrows.Photo: Sixflashphoto

A target has one job: stop your arrows safely and let you pull them out without a fight. The two most common portable foam targets in North American archery, the Morrell Yellow Jacket YJ-350 and the Block Classic 18, solve that job in different ways. This comparison sets out the published specifications and the practical differences so you can pick the right one for your bow and your space.

The short version

Morrell Yellow Jacket YJ-350Block Classic 18
Dimensions16 × 16 × 13 in18 × 18 × 14 in
Weight12 lb per Cabela's (other listings differ)Approx. 14 lb (retailer figure)
ConstructionFully fused Poly-Fused cellular foam layers in a polypropylene wrapUnglued open layers of Compressed Friction Foam
Shootable sides4, with 32 offset bullseyes2
PointsField points and broadheadsField points, expandables and fixed-blade broadheads
Speed ratingStops 350 fpsNot stated
CarryE-Z tote handleTop carry handle

The Yellow Jacket is the smaller, four-sided target with an explicit 350 fps rating. The Block is larger, two-sided, and stops arrows by friction between unglued layers, a design the brand says makes arrow removal easier.

Morrell Yellow Jacket YJ-350 Dual Threat

Compound shooters who want four sides and a stated speed rating

Morrell Yellow Jacket YJ-350 Dual Threat

A compact four-sided foam target with offset bullseyes on every face, rated for compound speeds up to 350 fps and marketed for both field points and broadheads.

Size
16 × 16 × 13 in
Sides
4 shootable sides, 32 bullseyes
Rated for
Arrow speeds up to 350 fps
Points
Field points and broadheads
Construction
Fused cellular foam layers, polypropylene wrap
Weight
12 lb (Cabela's listing; other retailers list lower)

Specifications: Morrell Targets product page and Cabela's specification sheet

The Yellow Jacket's layers are fully fused with baffles between them that Morrell describes as absorbing the arrow's energy in stages. Four shootable faces with offset bullseyes spread wear across more of the foam, which is the main argument for its longer life relative to its size. The polypropylene wrap is weather resistant.

Block Classic 18

Archers who prioritise easy arrow removal and a larger face

Block Classic 18

The original open-layer block target: unglued foam layers stop the arrow with friction rather than compression, which the brand says reduces the force needed to pull arrows.

Size
18 × 18 × 14 in
Sides
2 shootable sides
Points
Field points, expandables and fixed-blade broadheads
Construction
Unglued open layers of Compressed Friction Foam
Weight
Approx. 14 lb (retailer figure)
Rated speed
Not stated by the manufacturer

Specifications: Lancaster Archery and Walmart specification sheets

The Block's defining feature is the open-layer design. Because the layers are not glued, the arrow is held by friction along its length rather than by the foam gripping the point, and Block says this is why arrows come out easily even with broadheads. The trade-off is two shootable faces rather than four.

Close-up of hands pulling an arrow out of a target boss
Arrow removal is the practical difference most archers notice between foam target designs.Photo: Staff Sgt. Sheila deVera

How to choose

  • Bow speed. If you shoot a fast compound, the Yellow Jacket's explicit 350 fps rating is a useful assurance. Block does not publish a speed rating for the Classic 18, so check the current manufacturer guidance for your bow.
  • Arrow removal. Both brands claim easy removal. Block's open-layer design is specifically built for it; Morrell's fused layers rely on the foam construction. Broadheads are harder to remove from any foam target than field points.
  • Space and portability. The Yellow Jacket is smaller and lighter; the Block gives a larger aiming face. Both have carry handles.
  • Longevity. Four faces versus two means the Yellow Jacket spreads wear further for its size, though the Block's larger faces have more foam each. Longevity depends mostly on how tightly you group: shooting the same spot destroys any foam target.

Yellow Jacket YJ-350 vs Block Classic 18

Advantages

  • Yellow Jacket: four sides and 32 bullseyes spread wear
  • Yellow Jacket: explicit 350 fps rating for fast compounds
  • Block: open-layer design built for easy arrow removal
  • Block: larger 18 in face for longer distances

Trade-offs

  • Yellow Jacket: smaller face; weight figures vary between retailers
  • Yellow Jacket: fused layers may grip broadheads more firmly
  • Block: only two shootable sides
  • Block: no published speed rating

You can see Morrell Yellow Jacket listings and Block Classic 18 listings on Amazon.

Frequently asked questions

Can I shoot broadheads into these targets?

Both manufacturers say yes. Expect more effort to remove broadheads, and expect broadheads to shorten the life of any foam target compared with field points.

Will a recurve or longbow work with them?

Yes. Lower-speed bows put less stress on the foam. Arrow removal from dense foam can be harder with lighter arrows; a pull-through lubricant or arrow puller helps.

How long will a foam target last?

It depends mainly on arrow volume, arrow speed, point type and how tightly you group. Rotating faces and aiming at different spots extend life considerably.

Equipment topics:Archery TargetsBowhunting
Tags:archery targetsMorrellBlock Targetsfoam targetbroadheadsreview